Rackhams Wall-mounted Box Pergola and Decking Kit - Rustic Brown - 4.8m x 4.8m

"Create a defined outdoor zone with the Arbor Garden Solutions Wall-mounted Box Pergola and Decking Kit, designed to bring partial shade and a more structured finish to a garden, patio or deck area. With pre-cut components and step-by-step instructions, the kit is presented as a straightforward way to add a pergola framework alongside decking and balustrade detailing. Built around a wall-mounted box pergola format, it offers a practical structure for decorative additions such as hanging plants, climbing vines, outdoor lighting or sconces. The kit’s timber specification combines Scandinavian pine components with engineered uprights, while the decking boards are supplied as grooved, green treated boards. Key features Wall-mounted box pergola and decking kit with balustrade Rafters in CLS C16 Scandinavian pine, 2x6 (38mm x 138mm) Braces in CLS C16 Scandinavian pine, 2x4 (38mm x 89mm) Engineered uprights in 94x94 redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified Decking boards in 32mm x 125mm grooved, green treated timber, FSC Pre-drilled holes and included fixings for assembly All necessary hardware for assembly included (wall fixings not included) Dimensions Posts supplied at 2.7m and can be trimmed if needed for a free-standing structure. What's included Pre-cut components Spacer block Pre-assembled balustrades All necessary hardware for assembly (excluding wall fixings) Step-by-step instructions How to assemble Prepare the area by ensuring a flat, level surface before assembling the frame Assemble the decking frame by securing the joists, beams and decking planks, using the spacer block to maintain spacing Install the pergola structure by positioning the upright posts, attaching runners and rafters, and securing via the pre-drilled holes and included fixings Attach the pre-assembled balustrades, ensuring they are aligned and securely fixed Tools required: electric screwdriver, drill, socket wrench, spirit level and ladder Assembly also requires a 10mm socket and screwdriver; a battery-operated model is recommended Treatment & maintenance Please note that due to the inherent characteristics of natural timber, product colours may vary from those depicted. Sweep regularly to remove leaves, dirt and debris Every few months, wash using mild soap and water with a soft-bristle brush Avoid using pressure washers at high settings Inspect at least once a year for loose screws, nails or cracked boards; tighten fasteners and replace damaged boards if needed Apply a wood sealant or stain every 1-3 years; if sprinkled water absorbs quickly, apply a new coat of sealant Use rubber or felt pads under furniture legs to help prevent scratches Keep planters elevated with stands to allow air circulation and help prevent trapped moisture In winter, clear snow with a plastic shovel and avoid harsh de-icing salts Support & warranty Lifetime warranty covers manufacturing faults. Please note The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options. Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings. Natural timber products may vary in colour and grain from images shown."