Rackhams Rectangular Pergola And Decking Kit With Balustrade V.5 - Natural (Light Green) - 3.6m x 4.2m

"Create a defined outdoor area with the Arbor Garden Solutions Rectangular Pergola and Decking Kit with Balustrade V.5, a coordinated pergola and decking kit supplied with pre-cut components and step-by-step instructions. Designed to form a level decking/base area with a pergola structure above, it’s a considered way to zone a garden or patio and connect adjoining spaces with a consistent finish. The listed rectangular size refers to the total decking/base area rather than the pergola frame. The pergola is designed to span the full width and half the depth of the base; for example, where the base area is 2.4m x 3.0m, the structural post footprint would be approximately 2.4m x 1.5m, with a standard 45cm overhang on all sides. Posts are supplied at 2.7m and can be trimmed if required for a free-standing structure. Key features Rectangular pergola and decking kit with balustrade Pre-cut components with step-by-step instructions Decking boards: 32mm x 125mm grooved, green treated, FSC Uprights: 94 x 94 redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified Rafters: CLS C16 Scandinavian pine 2 x 6 (38mm x 138mm) Braces: CLS C16 Scandinavian pine 2 x 4 (38mm x 89mm) Pre-drilled holes and included fixings for assembly All necessary hardware for assembly is included How to assemble Prepare the area by ensuring a flat, level surface Assemble the decking frame using the joists, beams and decking planks, checking spacing with the supplied spacer block Install the pergola structure by positioning the upright posts, then attaching runners and rafters using the pre-drilled holes and fixings Attach the pre-assembled balustrades, ensuring they are aligned and securely fixed Tools required: electric screwdriver, drill, socket wrench, spirit level and ladder Assembly requires a 10mm socket and screwdriver; a battery-operated model is recommended Treatment & maintenance Sweep regularly to remove leaves, dirt and debris. Every few months, wash using mild soap and water with a soft-bristle brush; avoid high pressure washer settings. Inspect at least once a year for loose screws, nails or cracked boards, tightening fasteners and replacing damaged boards as needed. Apply a wood sealant or stain every 1-3 years; to check if sealing is needed, sprinkle water on the boards—if it absorbs quickly, apply a new coat. Use rubber or felt pads under furniture legs, keep planters elevated, and choose breathable outdoor rugs. In winter, clear snow with a plastic shovel and avoid harsh de-icing salts. Please note that due to the inherent characteristics of natural timber, product colours may vary from those depicted. Support & warranty Lifetime warranty covers manufacturing faults. Please note The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options. Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings. Natural timber products may vary in colour and grain from images shown."