Rackhams Square Pergola And Decking Kit With Three Side Balustrade - Rustic Brown - 4.2m x 4.2m

"Create a defined outdoor area with the Arbor Garden Solutions Square Pergola And Decking Kit With Three Side Balustrade, a pergola and decking kit designed around pre-cut components and step-by-step instructions. Supplied with upright posts at 2.7m (trimmed if needed for a free-standing structure), it’s intended to be set up on a flat, level surface, giving you a structured platform with a pergola frame and balustrading detail. Timber components are specified for key structural elements, including CLS C16 Scandinavian Pine for rafters and braces, engineered uprights in 94x94 Redwood ‘A’ Quality (kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified), and 32mm x125mm grooved decking boards that are green treated and FSC certified. All necessary hardware for assembly is included. Key features Square pergola and decking kit with three side balustrade Rafters in CLS C16 Scandinavian Pine 2x6 (38mm x 138mm) Braces in CLS C16 Scandinavian Pine 2x4 (38mm x 89mm) Engineered uprights: 94x94 Redwood ‘A’ Quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified Decking boards: 32mm x125mm, grooved, green treated, FSC certified All necessary hardware for assembly included What's included All necessary hardware for assembly How to assemble Prepare the area by ensuring a flat, level surface; posts are supplied at 2.7m and can be trimmed if needed for a free-standing structure Assemble the decking frame by securing the joists, beams, and decking planks, using the provided spacer block for spacing Install the pergola structure by positioning the upright posts, attaching runners and rafters, and securing via pre-drilled holes using the included fixings Attach the pre-assembled balustrades, aligning and fixing securely Tools required: electric screwdriver, drill, socket wrench, spirit level, ladder Assembly requires a 10mm socket and screwdriver Treatment & maintenance Clean by sweeping regularly to remove leaves, dirt, and debris. Every few months, wash using mild soap and water with a soft-bristle brush; avoid high pressure washer settings. Inspect at least once a year for loose screws, nails, or cracked boards, tightening fasteners and replacing damaged boards as needed. Apply a wood sealant or stain every 1-3 years; a water-sprinkle test can be used to check if sealing is needed (if water absorbs quickly, apply a new coat). Please note that natural timber colours may vary from those depicted due to the inherent characteristics of wood. Support & warranty Lifetime warranty covers manufacturing faults. Please note The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options. Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings. Natural timber products may vary in colour and grain from images shown."