Rackhams Rectangular Pergola And Decking Kit With Balustrade V.8 - Rustic Brown - 3.6m x 4.2m

"Create a defined outdoor area with the Arbor Garden Solutions Pergola and Decking Kit with Balustrade V.8, combining a pergola structure with a matching decked base and balustrade. Supplied with pre-cut components and step-by-step instructions, it is designed for straightforward installation and a clean, structured finish. This rectangular kit is sized by total decking/base area rather than the pergola frame. The pergola is designed to span the full width and half the depth of the base, with a standard 45cm overhang on all sides (front/back and sides). When planning furniture placement or base construction, refer to these internal dimensions. Key features Rectangular pergola and decking kit with balustrade Pre-cut components with step-by-step instructions Posts supplied at 2.7m and can be trimmed for a free-standing structure Pre-drilled holes for positioning and fixing Spacer block provided to help maintain correct spacing All necessary hardware for assembly included Rafters in CLS C16 Scandinavian Pine 2x6 (38mm x 138mm) Braces in CLS C16 Scandinavian Pine 2x4 (38mm x 89mm) Engineered uprights in 94x94 Redwood ‘A’ Quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified Decking boards: 32mm x 125mm, grooved, green treated, FSC How to assemble Prepare the area by ensuring a flat, level surface before assembling the frame Assemble the decking frame by securing joists, beams, and decking planks, using the spacer block to maintain spacing Install the pergola structure by positioning upright posts, attaching runners and rafters, and securing using pre-drilled holes and fixings Attach the pre-assembled balustrades, ensuring they are aligned and securely fixed Tools required: electric screwdriver, drill, socket wrench, spirit level, ladder, 10mm socket and screwdriver Treatment & maintenance Please note that due to the inherent characteristics of natural timber, product colours may vary from those depicted. Sweep regularly to remove leaves, dirt, and debris Every few months, wash using mild soap and water with a soft-bristle brush Avoid pressure washers at high settings Inspect at least once a year for loose screws, nails, or cracked boards; tighten fasteners and replace damaged boards as needed Apply a wood sealant or stain every 1-3 years; if water sprinkled on the boards absorbs quickly, apply a new coat Use rubber or felt pads under furniture legs to help prevent scratches Keep planters elevated with stands to allow air circulation and help prevent trapped moisture Choose breathable outdoor rugs that do not retain moisture In winter, clear snow with a plastic shovel and avoid harsh de-icing salts Support & warranty Lifetime warranty covers manufacturing faults. Please note The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options. Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings. Natural timber products may vary in colour and grain from images shown."