Rackhams Rectangular Pergola And Decking Kit With Balustrade V.1 - Rustic Brown - 2.4m x 3.6m

"Designed to help shape a defined outdoor area, the Arbor Garden Solutions Rectangular Pergola and Decking Kit with Balustrade V.1 combines a pergola structure with a decking/base and balustrade. Supplied with pre-cut components and step-by-step instructions, it is intended to be straightforward to set up on a flat, level surface. The listed size reflects the total decking/base area rather than the pergola frame. The pergola is designed to span the full width and half the depth of the base, with a standard 45cm overhang on all sides. When planning layout and furniture placement, refer to the internal dimensions stated in the sizing disclaimer. Key features Decking boards: 32mm x 125mm grooved, green treated, FSC Rafters: CLS C16 Scandinavian Pine 2x6 (38mm x 138mm) Braces: CLS C16 Scandinavian Pine 2x4 (38mm x 89mm) Engineered uprights: 94x94 redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified Pre-drilled holes and fixings for assembly Pre-assembled balustrades All necessary hardware for assembly included How to assemble Prepare the area by ensuring a flat, level surface Assemble the decking frame using joists, beams and decking planks, with the supplied spacer block for spacing Install the pergola by positioning the upright posts, then attaching runners and rafters using the pre-drilled holes and included fixings Fit the pre-assembled balustrades, aligning and securing them in place Tools required: electric screwdriver, drill, socket wrench, spirit level and ladder Posts are supplied at 2.7m and can be trimmed if needed for a free-standing structure Assembly requires a 10mm socket and screwdriver Treatment & maintenance Due to the inherent characteristics of natural timber, product colours may vary from those depicted. Sweep regularly to remove leaves, dirt and debris Every few months, wash using mild soap and water with a soft-bristle brush Inspect at least once a year for loose screws, nails or cracked boards; tighten fasteners and replace damaged boards as needed Apply a wood sealant or stain every 1-3 years; if water sprinkled on the boards absorbs quickly, apply a new coat of sealant In winter, clear snow with a plastic shovel and avoid harsh de-icing salts Support & warranty Lifetime warranty covers manufacturing faults. Please note The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options. Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings. Natural timber products may vary in colour and grain from images shown."