Rackhams Rectangular Pergola and Decking Kit With Balustrades V.12 - Rustic Brown - 2.4m x 4.2m

"Designed to bring structure and definition to an outdoor area, the Arbor Garden Solutions Rectangular Pergola and Decking Kit With Balustrades V.12 combines a pergola, decking and balustrades in one coordinated kit. Pre-cut components and step-by-step instructions support a straightforward build, creating a level surface that helps connect different parts of a garden or patio. For planning, the stated rectangular size refers to the total decking/base area rather than the pergola frame. The pergola is designed to span the full width and half the depth of the base, with a standard 45cm overhang on all sides (front/back and sides). In the example given, a 2.4m x 3.0m base corresponds to an approximate structural post footprint of 2.4m x 1.5m. Key features Pre-cut components with step-by-step instructions Posts supplied at 2.7m and can be trimmed if needed for a free-standing structure Decking boards: 32mm x 125mm grooved, green treated, FSC Rafters: CLS C16 Scandinavian Pine 2x6 (38mm x 138mm) Braces: CLS C16 Scandinavian Pine 2x4 (38mm x 89mm) Engineered uprights: 94x94 Redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified Pre-assembled balustrades All necessary hardware for assembly included How to assemble Prepare the area by ensuring a flat, level surface Assemble the decking frame by securing joists, beams and decking planks, using the spacer block for correct spacing Install the pergola structure by positioning upright posts, then attaching runners and rafters using pre-drilled holes and included fixings Attach the pre-assembled balustrades, aligning and fixing securely Tools required: electric screwdriver, drill, socket wrench, spirit level and ladder Assembly requires a 10mm socket and screwdriver; a battery-operated model is recommended for efficiency Treatment & maintenance Due to the inherent characteristics of natural timber, product colours may vary from those depicted. Sweep regularly to remove leaves, dirt and debris. Every few months, wash using mild soap and water with a soft-bristle brush; avoid high pressure washer settings. Inspect at least once a year for loose screws, nails or cracked boards, tightening fasteners and replacing damaged boards if needed. Apply a wood sealant or stain every 1-3 years; if water sprinkled on the boards absorbs quickly, apply a new coat. Use rubber or felt pads under furniture legs, keep planters elevated, and choose breathable outdoor rugs. In winter, clear snow with a plastic shovel and avoid harsh de-icing salts. Support & warranty Lifetime warranty covers manufacturing faults. Please note The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options. Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings. Natural timber products may vary in colour and grain from images shown."