Rackhams Rectangular Pergola And Decking Kit With Balustrade V.7 - Rustic Brown - 3m x 4.2m

"Create a defined outdoor area with the Arbor Garden Solutions Rectangular Pergola and Decking Kit with Balustrade V.7. Designed as a coordinated pergola and decking solution, it’s supplied with pre-cut components and step-by-step instructions to support a straightforward set-up. The kit is intended to provide a level walking surface and a structured layout for outdoor use. Rectangular sizing is based on the total decking/base area rather than the pergola frame. The pergola is designed to span the full width and half the depth of the base, with a standard 45cm overhang on all sides (front/back and sides). For a listed size example of 2.4m x 3.0m, the structural post footprint would be approximately 2.4m x 1.5m. Key features Pre-cut components with step-by-step instructions Posts supplied at 2.7m and can be trimmed for a free-standing structure Decking boards: 32mm x 125mm grooved, green treated, FSC Rafters in CLS C16 Scandinavian Pine 2x6 (38mm x 138mm) Braces in CLS C16 Scandinavian Pine 2x4 (38mm x 89mm) Engineered uprights in 94 x 94 redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified Hardware required for assembly included How to assemble Prepare the area by ensuring a flat, level surface Assemble the decking frame by securing joists, beams and decking planks, using the provided spacer block for spacing Install the pergola structure by positioning upright posts, attaching runners and rafters, and securing via pre-drilled holes using the included fixings Attach the pre-assembled balustrades, aligning and fixing securely Tools required: electric screwdriver, drill, socket wrench, spirit level and ladder Assembly requires a 10mm socket and screwdriver; a battery-operated model is recommended Treatment & maintenance Please note that due to the inherent characteristics of natural timber, product colours may vary from those depicted. Sweep regularly to remove leaves, dirt and debris Every few months, wash with mild soap and water using a soft-bristle brush Inspect at least once a year for loose screws, nails or cracked boards; tighten fasteners and replace damaged boards if needed Apply a wood sealant or stain every 1–3 years; if water sprinkled on the boards absorbs quickly, apply a new coat Avoid pressure washers at high settings, harsh de-icing salts, and use a plastic shovel for snow clearance Support & warranty Lifetime warranty covers manufacturing faults. Please note The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options. Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings. Natural timber products may vary in colour and grain from images shown."