Live Edge 3/5/7 Pendant Wooden Plank Light

Available with either 3, 5 or 7 pendants, the live edge plank light comprises a reclaimed timber fitting with pendants in either a straight line or on alternative sides. The lamps are not a single piece of timber, but constructed from multiple sections of reclaimed timber. The live edge is hand designed & cut, not from natural grain. Although every effort is made to hide joints & previous marks in the timber, the units are made from reclaimed timber & some may show up in the finished piece. The units are made to a standard size, but can be adjusted if required. Bulb holder size is ES27 Edison screw. The 3 pendant unit is 750mm long, 150mm to 180mm wide & 45mm deep. The 5 lamp unit is 1000mm long, between 180 & 200mm wide & 45mm deep. The 7 lamp unit is 1400mm long, between 180 & 200mm wide & 45mm deep. All sizes are approximate. The unit is attached via four screws, two on each side rail. (fixings are supplied). Electrical connection is via one single connector block. The lamps are constructed to allow the cabling to be hidden inside the main body. The standard pendant cable length is 150mm, from timber to bulb holder. The additional length option allows for drops of up to 450mm - please confirm details of the extended drop/variable drop requirements within your order notes. If you order long cables but do not specify what length or configuration, then the cables will come all at 450mm. PLEASE NOTE THAT ONCE CONSTRUCTED, THE CABLES ARE NOT ADJUSTABLE. The pendants are finished with an antique brass/bronze bulb fitting on a black drop cable. The timber can be waxed in either a medium or dark oak. (Other colour lamp holders are available at an extra cost. Please contact me before placing your order). Fittings can also be customised to sizes & pendant numbers if required (please enquire prior to order incase of additional cost). Please note that the bulbs are not included ???? Live Edge 3/5/7 Pendant Wooden Plank Light