Polished Nickel Ceiling Light Minimalist Edison Lamp, Flushmount Sconce

Ceiling Light or Wall Sconce - Polished Nickel - Small Lamp - Minimalist Edison Bulb Lamp - UL Listed Option - Flushmount Flush Mount - Wall Mount The Lume II With simple, clean lines & a polished nickel finish, the Lume II adds a sensible minimalist accent with just a bit of glam. Available in two versions, the Lume II features the same low profile ceiling or wall plate but with a graceful curved edge, or choose a more modern rendition with the straight edged plate. With the exposed bulb construction, all you need in order to change your look is an quick & easy bulb swap. Gorgeous paired with a mirrored silver bowl bulb! With solid brass construction & a durable nickel plated finish, the Lume II is suitable for indoor or sheltered outdoor use (damp location). Mounts flush to the ceiling or wall for a variety of applications. SPECS: Dimensions - Base, 5 diameter x 1/4 deep Total height, 2 5/8 Finish - Polished Nickel, plated over brass Electrical Type: US Standard E26 socket - pictured, internal mounting with no visible mounting holes; not UL listed US UL Listed E26 socket - external visible mounting holes & hardware (see Mounting #2 option below for more information) International E27 socket - internal mounting with no visible hardware; uses CE or NSW approved electrical components; not CE or NSW listed; bulbs not included on international orders- glazed white porcelain Lamping -medium base bulb; incandescent or LED; Max Wattage - 60 watts Mounting - Hardwire, flush to receptacle in ceiling or wall, hardware included Suitable for indoor or sheltered outdoor, damp locations UL listed option - see #2 External mounting method We can make this fixture in two ways, so that you can choose a mounting method: 1. Internal mounting: As seen in the listing photo, the base of the light is solid, without any visible mounting holes. If we make it this way, the light will mount by a short threaded bolt that comes out from the back (it is attached to the electrical socket) & extends approximately 3/16 from the back of the light. This bolt screws into a threaded hole in the mounting bracket, which we supply. The bracket attaches to your electrical junction. First your electrician would mount the bracket, attach the electrical wires, then screw the fixture into the mounting bracket's threaded hole. This method does twist the wiring somewhat, but after just a few turns, the light should, in most cases, be flush to the ceiling or wall. 2. External mounting: The other way the light can be mounted is with external mounting hardware. Two small holes can be pre-drilled into the fixture on either side of the copper tube that covers the electrical socket. Two mounting bolts with small finished decorative caps are sent along with your fixture, as well as a special mounting bracket that is threaded to receive the two mounting bolts. Your electrician would mount the bracket to the junction, thread the bolts into the bracket, wire the light & place the copper over the mounting bolts, then attach the caps. External method is required for UL listed lights. in some situations, depending on your building's electrical wiring & local building codes, the second method may be the necessary way to mount the fixture. We are happy to build them either way for you, just let us know what you need. Fixture only, bulb not included OPTIONS: The Lume is available in copper, brass, steel, bronzed steel, or rusted steel patina. Please browse our shop for other Lume options. Thank you for peeking in our shop. Handmade is made with love! Polished Nickel Ceiling Light Minimalist Edison Lamp, Flushmount Sconce