Rabbit & Toadstool Lampshade Beige Linen Drum Shade

Please read the full descriptions below of sizes, fittings & liner colours before ordering. 25cm (10) diameter, approx 20cm (8) high. Suggested uses: medium standard/table lamps, ceiling/pendant light for small or medium sized rooms. 28cn (11) diameter, approx 8 high. Suggested uses: Medium sized USA harp style standard/table lamps. 30cm (12) diameter, medium/large shade approx 21cm (8.5) high (this size can only be shipped to the UK & Europe, please enquire about shipping costs elsewhere). Suggested uses: medium-large standard/table/floor lamps, ceiling/pendant light for medium or large sized rooms. This size is the most popular & tends to suit most sizes of rooms & lamps. Please choose the correct fitting for your fitment & country: UK/EU standard/table lamp (hole for bulb at the bottom of the shade, hole is 40mm diameter with a 25mm converter plug). USA harp/spider (for standard/table lamps, smaller hole at the top of the shade). Ceiling/pendant lamp (hole for bulb at the top of the shade). Round drum-shaped lampshade, covered by hand in rabbit & toadstools print fabric. Background is a beige linen-look print. A tasteful country look with a contemporary twist that would complement any living room or bedroom. The rabbits appear at every angle, with the larger upright rabbit at the centre of the design. The rigid body of the shade is covered with a high quality 100% cotton fabric & attached to white metal rings top & bottom, the top edges are then rolled & tucked under. Sizes refer to the diameter of the rings - I make them in standard heights but they can be made to other heights for custom orders. These are made in my home studio in Chester, England & can be shipped to most addresses across the world. Pattern placement will vary, particularly on smaller sizes; please let me know if you have any preference on which animals feature. There will be a small joining seam at the back where the pattern will not match. As standard, I use a white backing material that gives you maximum brightness when lit, as the light shines through the fabric. You also have the option to have an Old Gold lining/backing which looks more opulent inside when unlit, but throws light up & down from inside when lit, rather than through the fabric. If you would prefer this, please add a note to your order, there is no extra charge. Any questions? Feel free to contact me for help or advice. Prefer a different size, colour or want to add a trim? Contact me or Request a Custom order. This is for a shade only, not any electrical fittings. The technical stuff: Tested for fire resistance to comply with BS EN 60598-1-2008, the British Standard for Luminaries. The PVC liner material has been tested in the Lighting Association Laboratories & has passed the glow wire test. Maximum recommended bulb wattage for 15cm is 40w, then 60w for larger sizes. Low energy bulbs reduce the risk of scorching. Light diffusers are available to spread the light of pendant lights & hide the light bulb, please see this listing: https://www.etsy.com/uk/listing/559530123/light-diffuser-for-vintage-high-st?ref=shop_home_active_1 Rabbit & Toadstool Lampshade Beige Linen Drum Shade