This fabric dust-door creates a practical barrier between the work zone and living areas so daily life can continue during renovation. The nonwoven polypropylene sheet helps limit airborne dust from sanding, cutting and drilling, reducing transfer into adjacent rooms and shortening post-job cleaning. A full-height, double-sided zip follows a clean C-path and operates from either side, giving a wide opening for buckets, vacuums and tool cases without removing the curtain. Sized at 110 x 220 cm, the curtain fits most standard UK doorways in homes and offices. When a smaller aperture is required, trim the material to suit the frame and seal the cut edge with tape for a neat finish. Installation is straightforward: apply adhesive tape to a clean, dry frame, position the sheet, press firmly all around the perimeter, then test the zip path for smooth travel. When the work is complete, peel away and dispose of the tape. The curtain rolls compactly for storage and reuse, subject to condition. Use it to separate living rooms, hallways or kitchens while you paint, sand plaster, chase cables or drill fixings. For best results, keep the zip closed when not passing through, minimise draughts, and maintain ventilation within the work zone according to site safety guidance. This product is a dust-control aid rather than a sealed containment system. Performance depends on correct installation and local conditions. Tape is not included unless stated on the pack.