"Designed for discreet, creative lighting, the Eagle B/G/R LED Tape Light 5M is a highly flexible chasing LED tape light for adding colour accents in a wide range of settings. IP65 rated and finished with an epoxy resin coating to protect the LEDs, it’s well suited to installations where a slim, low-profile strip is essential. Extremely thin at just 2.5mm deep and 8mm wide, this tape can be fitted into many unusual places. Supplied on a 5m reel with a self-adhesive back, it applies easily to most smooth surfaces by removing the backing paper. The strip can also be cut or joined, with cutting points at every 9 LEDs (3 blue, 3 green, 3 red) at 150mm intervals. With 20 blue, 20 green and 20 red LEDs per metre and low power consumption, it’s a practical choice for homes, vehicles, shops, bars and nightclubs. Please note: this is not colour mixing tape. Key features Chasing LED tape light with IP65 rating 20 blue, 20 green and 20 red LEDs per metre Epoxy resin coating to protect the LEDs Compact profile: 2.5mm deep and 8mm wide Supplied on a 5m reel with self-adhesive backing Cutting points every 9 LEDs (3B-3G-3R) at 150mm intervals Can be cut or joined Power supply and controller required (sold separately) Sizing 5m length 2.5mm D x 8mm W Cut points at 150mm intervals "