"Create a defined outdoor zone with the Arbor Garden Solutions Square Pergola And Decking Kit With One Side Balustrade, a coordinated pergola and decking kit designed around pre-cut components and step-by-step instructions. The structure combines a pergola frame with decking to form a level walking surface that connects areas of your garden or patio, while the single-side balustrade adds a considered finishing detail. Materials are specified throughout, including CLS C16 Scandinavian Pine for rafters and braces, engineered uprights in 94x94 redwood ‘A’ quality (kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified), and 32mm x 125mm grooved decking boards that are green treated and FSC certified. Assembly hardware is supplied, with instructions provided by email 24-hours before delivery or available to download. Key features Square pergola and decking kit with one side balustrade Rafters in CLS C16 Scandinavian Pine 2x6 (38mm x 138mm) Braces in CLS C16 Scandinavian Pine 2x4 (38mm x 89mm) Engineered uprights in 94x94 redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4 Upright posts supplied at 2.7m and can be trimmed for a free-standing structure Decking boards: 32mm x 125mm, grooved, green treated, FSC certified Uprights are 70% PEFC certified All necessary hardware for assembly is included What's included All necessary hardware for assembly How to assemble Prepare the area by ensuring a flat, level surface before assembling the frame Assemble the decking frame by securing the joists, beams, and decking planks, using the spacer block to maintain spacing Install the pergola structure by positioning the upright posts, attaching runners and rafters, and securing via pre-drilled holes using the included fixings Attach the pre-assembled balustrades, ensuring they are aligned and securely fixed Tools required: electric screwdriver, drill, socket wrench, spirit level, ladder, 10mm socket and screwdriver Treatment & maintenance Natural timber can vary in colour from images shown. Sweep regularly to remove debris, then clean every few months using mild soap and water with a soft-bristle brush; avoid high pressure-washer settings. Inspect at least once a year for loose fasteners or cracked boards and tighten or replace as required. Apply a wood sealant or stain every 1-3 years; a water-sprinkle test can be used to check if resealing is needed (if water absorbs quickly, apply a new coat). In winter, clear snow with a plastic shovel and avoid harsh de-icing salts. Support & warranty Lifetime warranty covers manufacturing faults. Please note The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options. Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings. Natural timber products may vary in colour and grain from images shown."