Nixie Tube Clock In-14 Raspberry Pi Hat & Shield For Boyfriend, Husband, Vintage, Glowing Clock, Gift, Steampunk

IN-14 RASPBERRY PI HAT SHIELD NIXIE TUBES CLOCK [TUBES, SOCKETS, COLUMNS, RASPBERRY PI, POWER SUPPLY] NOTE: UPS EXPRESS DELIVERY IS HIGHLY RECOMMENDED ECONOMY SHIPPING CAN BE VERY SLOW & UNRELIABLE Project Divergence Meter HAT Arduino Shield/Adapter/Raspberry Pi Nixie Clock with Columns Designed for 6 IN-14 xUSSR Nixie Tubes with Sockets IN-14 Tubes are the most popular mass-produced Nixie Tubes Nixie Clocks are one of the most beautiful & popular Vintage Clocks Clock features Startup Tune, RGB backlight, USB port for updates Options include Tubes, Columns, Sockets, Raspberry Pi, Power Supply Clock features Adapter from Arduino Shield to Raspberry Pi Board Shield Board is designed for Arduino UNO & MEGA 2560 Boards It allows you to write your own unique programs for the Arduino platform All the latest Source codes are always available on our GitHub channel PCB, Design, Schematics, Case & Software made by GRA & AFCH LISTING INCLUDES: - Shield HAT Tubes Clock (NCS314+NCS3XX Adapter Boards) - IN-14 Nixie Tubes - 6 pcs Set (optional, choose in selector) - Columns with Dots - 2 pcs (optional, choose in selector) - Socket pins - Set for 6 Tubes (optional, choose in selector) - Raspberry Pi Control Board (3xx) - (optional, choose in selector) - Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector) - User Manual on Vintage style paper Socket pins are optional for the Shield HAT Board Columns with separating Dots are optional for the Clock Shield to Raspberry Pi Adapter is included with the Shield HAT Clock Raspberry Pi Control Board is optional for the Clock Power Supply is optional for the Clock OUR BENEFITS: - All our Nixie Tubes Clocks are using HV513WG chips, - it provides higher brightness in multiplexing mode in comparison with HV5812 chip & greater reliability compared to legacy K155ID1 - We offer flexible Tubes Boards platform, that support many Nixie Tubes - (out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 & Z573, Z5660M, ZM1042, Z568M Nixie Tubes) - It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden & Stone Cases for our Clocks - Fast uploading pf the Firmware via USB to the Control Board - All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel - No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI), - drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux - It is easy to modify the Nixie Clock's Firmware functions for your tasks due to the open Arduino platform - We use High Quality PCBs & Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic) - Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock - Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing & Start up Tune. Our Boards use, - Firmware version can be seen at the end of the POST test - Our Tubes Boards use Unique detailed Tube test, soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures - We provide competent technical support for all our products SOFTWARE FEATURES: 6 digits IN-14 Nixie tubes [hh:mm:ss]. 12/24 hour format. Time synchronization via the Internet Full static display mode. The maximum possible brightness of the tubes. Automatic update information on the tubes. Unique RGB LED backlight with 16,7 million colors. HARDWARE FEATURES: Integrated adjustable High Voltage Power supply: 150 - 220 V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. Test points for testing, adjusting & controlling low & high voltage circuits. Internal buzzer. Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery. 3 buttons on board to control. IR reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with Tone library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA - works fluently.. Temperature sensor connector (DS18B20; 1-Wire protocol). 8 pcs of RGB SMD LEDs. SPI up to 4Mhz. Places for 2 column with 2 neon dots inside. Separate controls upper & lower dots. Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive +). Reverse polarity protection. Nixie Tubes Clock Shield NCS314 IN-14 size: