This Wood Beam LED Pendant Light is an old-worldly composition of timber & steel contrasted with the clean, modern look of embedded LEDs. The steelwork of our pendant is all hand fabricated, finished with black oxide & sealed with linseed oil, providing a beautifully antiqued & aged finish that is dry to the touch. The rustic Cypress wood has been through a four-stain process & sealed with Danish Oil. A final light coat of wax is applied & polished. Each wooden beam will have the same colour tone but uniquely distressed. We have added an old-style boilerplate to complete the authentic vintage industrial look & feel. Two steel ceiling plates are provided to tether this pendant LED to the ceiling via chain & S hooks. This light is perfectly suited for use in a multitude of environments. Due to the quality of light provided & the warm tones of the wood, this would be ideal over a dining table, a bar counter, a food service area, a billiards or snooker table, or passageway lighting, or could be used in any environment that requires an authentic vintage look. The LED driver is recessed out of view into the top of the timber. It may also be suitable when glass bulbs are not permitted, & shatterproof requirements are in place. This light has an overall drop height of 1500mm that can be adjusted shorter via the chain links. It can also be increased by using the options provided. The standard beam size is 90mm wide x 90mm high x 1200mm long. However, we can build these lights to other specific lengths or scale up to larger timber dimensions. Please contact us if you have an idea or require a custom build. It comes wired & ready for your electrician to install & is supplied with a remote-control dimmer that can be configured to control one or many beam lights. This is especially useful when installing new dimming wiring is difficult or costly. All required lighting components come with either SAA, Rcm for Australia & New Zealand, CE for Europe, or UL listing for the US & Canada. Please note that this light fitting is built to order & may take up to four weeks to produce from the payment date. The pendant includes full installation instructions. If you would like a copy of the document before purchasing, please let us know, & we will email it to you. WE ARE SCALING BACK OUR ETSY STORE TO CONCENTRATE ON OUR WEBSITE. FIND OUR FULL RANGE AT LITTLEANVIL.COM Due to limits within Etsy, please mark your selection for electrical cable in the order notes - choose from black or brown, round or twisted fabric-covered cable. If no note is left we will provide brown round as standard to match the product image. Specifications: Indoor use only. Input Voltage: 240VAC (eg. AUS, UK, NZ) or 120VAC (eg. US, CA). Rated Wattage: 25W LED Driver Wattage: 40W LED: SMD strip. 12V -24V 30,000Hrs Light Output: 2200lm Colour Temperature: Optional Colour Rendition Index: >92 Natural White (4000K) Warm White (3000K) Dimmable: Yes, with supplied remote control. Remote Control Specification: Output - RF (Radio Frequency) Operating frequency - 868mhz Control distance - Greater than 15 metres. Battery - Lithium-ion 3V (1 x CR2025) FCC CE RoHS UL TUV Dimensions: Width: 1200mm Depth: 120mm Drop Height: 1500mm Standard Weight: Approximately 15kgs (33lbs) If our shipping quote seems incorrect, please contact us so we can try to accurately give you a figure based on your order quantity & location. Shipping within Australia varies greatly so the quote on our products is an average & may differ (higher or lower) based on your state. If you are an international purchaser & your country is not specified, please contact us & we will do our best to get you a price asap. International buyers: please be aware that you may be subject to import duties/taxes in your country. Timber Beam Led Pendant Light No.1 - Industrial Wood Wooden Ceiling Chandelier Remote Controlled Dimmer
