Wine Rack, Wine Stand Made Of Historic Wood

I'm offering a super stylish wine rack made from reclaimed wood. The wood used for the rack comes from an old farmhouse, where it served as a roof beam. I personally salvaged & carefully processed the beams. First, the beams were cut to length & cleaned of all coarse dirt. Next, I painstakingly brushed & sanded the beams by hand to bring out their beautiful structure & grain. Once all the woodwork was complete, the entire wine rack was coated three times with a colorless, water-based acrylic varnish, which preserves all signs of wear & gives the rack its satin sheen. It's important to mention that, due to its considerable age, the wood exhibits many authentic signs of wear. For example, dents, cracks, notches, nail holes, nail stubs, & chips are not defects, but rather historical evidence of a long life. The wine rack pictured has nine bottle holes, each approximately 9 cm in diameter & 15 cm deep. It stands on a large steel plate treated with a clear lacquer to prevent rust & ensure durability. Finally, the ReFactura branding, a registered trademark & the hallmark of my products, is inlaid on the underside of the rack, guaranteeing their quality. This unique wine rack will add a personal touch to your living space & showcase your fine wines. Mass Height: approx. 180 cm Depth: approx. 15.5 cm Width: approx. 13.5 cm Hole diameter: approx. 9 cm (max. bottle thickness) Hole depth: approx. 15 cm Steel plate size: approx. 40 cm x 40 cm (base) Weight: approx. 21 kg Various sizes with any number of bottle holes can be made! Just ask... The wine rack also comes with 3 foam sleeves for smaller bottles. Due to the size of the shelf, delivery will be made by a freight forwarding company to the first front door. Wine Rack, Wine Stand Made Of Historic Wood