Oak Coffee Table - Hairpin Metal Legs, Smooth Wood - 60cm X 100cm

Solid oak coffee table, available in natural/No wax or with a wax finish (recommended) The tabletop is finished to approx 4.5cm thick, 60cm wide & 100cm long (shown in picture) Planed & sanded to a smooth finish. This timber is solid oak, with no veneers or laminates. 41cm leg height (approx 45.5cm overall with tabletop) Complete with 4x raw steel (unpainted), strong hairpin legs. Fully tig welded, & laser-cut holes for accuracy. 3 pin. Please note raw steel may rust over time, we do however add a light coat of clear rust prevention oil (dries hard) to help protect, please message us if you prefer to not have this applied. Hand-made by ourselves in the UK, making sure all our items are of the highest quality. Supplied with all fixings you will need. Legs are supplied separately for easy transport, only needing to be screwed into the tabletop using the supplied screws. The tabletop is also pre-drilled for easy installation. We always try to select the highest quality wood to use in our products, but please note natural products can vary in shade & appearance, & may have knots, small splits, & small movements, especially with temperature changes & humidity. We try to keep this to a minimum by making sure the timber is dry before use, & we plane/sand to a smooth, flat finish before sending it out. Oak Coffee Table - Hairpin Metal Legs, Smooth Wood - 60cm X 100cm