Metal floor lamp - welded wrought iron unique lamp! Light sculpture made for cold forged metal. Standing lamp. Steel Style lamp. Industrial design light. Appropriate iron anniversary. The lamp is removable - for easy transport & cleaning. Inside I have put a thick white layer of special polyurethane material. This is done to improve light & reduce the ringing effect that often occurs with large hollow metal objects. in any case, part of this effect remains, especially because of the flared shape of the upper part! Please keep it in mind: with loud sounds & music, the Lamp - Bell increases the sound :) -Floor Metal Lamp LAMP - BELL, made by Wrought iron, cut through . UNIQUE! COMPLETELY made by hand. -Dimensions - 175cm/40cm/40cm. To see all the dimensions - please see the images of the lamp! -Lighting appliance is grounded & secure electrical part. -The lamp can be operated in-standard 220V or 110V. -The bulbs should be standard E27 Can be used any bulbs. It looks very good with vintage Edison bulbs (like the picture!). Recommended capacity - max 60W. The product is finished with a matte acrylic varnish. Although the final varnishing, rust may occur, since the material is iron. That is not considered a defect, the opposite - it is an effect - but always be taken into account! The edges are rough & can damage! Be careful! N.B. - The announcement refers only to the lamp! The bulb & not part of the article! The lamp can be operated in-standard 220V or 110V The plug is standart F (Schuko): nauka.offnews.bg/images/events/2015/08/01/16591/1438434616_1_559x.jpg For other standart you need adapter or you can replaced the plug. Metal Floor Lamp, Handmade Standing Lamp Industrial Design, Made By The Steel Style Things, 6Thanniversary